-
Posts
545 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by onebadmax
-
-
The aero motive fuel pump is a direct fit in the factory basket isn't it?
-
PayPal sent man. Thanks
-
I'll take the fans with the harness
-
-
Happen to have any non ported l92s?
-
I might be interested in this Nick. Question though, I couldn't find a level 6 on FLT's website? What's in it?
-
Im not sure why everyone seems to be afraid of puting the battery cable together to clear the PCM???? It wont harm your truck at all....I have done it dozens of times over the years of working on cars and have fixed several cars by doing this. BTW, I was told to do this by a GM area feild technician. I think they have a pretty good idea about what they are doing....
Because most people don't understand electronics or electricity in general. They think positive and negative can never touch or cross paths. It's actually quite funny. Try showing somebody a 24v system using two 12v batteries, LOL, watch their head explode when the see positive going to negative and vice versa.
-
Honestly I did a cam swap in my truck for less than 1k. Brand new cam, lunati springs and retainers, push rods, and gaskets. Total was around 880.00 bucks. Put it in myself. No way in hell I would pay more than 1800 for all of that installed.
-
What cc are they?
-
Ahh man, I want to get into the 8.50s this summer. I know a higher stall will help me attain that goal. I feel like if I went with a 3200 I would be leaving too much on the table. LOL what does your truck run and what all is done to it, Aldofashow?
-
224/230 .612/.612 116 LSA
Open to suggestions, would like to have a cam that will work decently both NA and Blown....
-
Waid at metalresearchinc dot com. As far as the blower goes, I will be upgrading the converter and trans at that time. I just want to wake the truck up for the summer.
Thank you John.
-
Will this be too much for a bolt on, Awd SS? I'm doing a cam later in the summer, but want to go ahead and buy a converter now.
What do you guys think?
-
As far as I know, ARH, kooks, and dynatech are your only options for 1-7/8 primary's.
-
I have some 200lb yellowfin pics around here somewhere let me get on my desktop and see if I can find them.
-
Humm that's the first one I have read where power increased. Good find.
-
That's why I included the duration, I'm just wondering if a stock LQ9 will have issues with the LEP Maggie cam? Or should I look to a different cam?
-
Very impressive.
-
Ok, I have read several articles indicating the TBSS intake loses HP on these engines. I believe one article was done by hotrod and they dyno tested an LQ9 after many upgrades and the TBSS intake lost HP.
Again, just what I have read, no personal experience with it. I'll spend my money on other areas where the cost to benefit ratio is better.
-
What's the max lift you can run without PTV clearence problems on a 224/230 cam?
Edit: changed "with" to "without"
-
Thoughts on how it will perform in a full bolt on LQ9? Will I have piston to valve clearance problems? Specs: 224/230 .612/ .612 114lsa. Plans are to run this with stock heads for now. Going with TFS 225s in the near future.
Ps I don't have the blower yet, will this cam perform decent naturally aspirated for now?
-
I'm going with 3200 stall, TFS 225 heads, and LEP Maggie cam 224/230. I'm planing on a blower in the future.
-
Guys I am building a new wet nitrous setup, standalone fuel system, plate, 150 shot. I am going to run c16 race fuel in my stand alone system. My question is should I still remove timing from my tune? Will spraying with the c16( highly detonation resistant) allow me to keep my timing at normal NA levels? I will be able to control the AFR with a fuel pressure regulator, too keep that in check while spraying.
-
Sounds good man. I'm about to order my trans and stall, I know the feeling! LOL
L92 top end swap hp gains?
in Engine Tech And Modification
Posted
Can someone tell me about what kind of AWHP I can expect from prc stage 1 ported l92 heads, truck intake, ARH longtubes, efans, volant CAI, and tune.