sprayed99

Lets get an explanation for your choice... If you guys don't mind. And don't get caught up in the branding. The Foose and US Mags wheels are made by the same place and owned by the same company. The Bonneville can be bought fully polished without the knock off spiner as well.

Going on this Rod Which wheel do you prefer? Also be aware that the wheels pictured have a smooth lip. My wheels will have a step lip similar to what an American Racing TT II has. Fronts will be 15x6 rear 15x12 Rear tires will be Hoosier Pro street 31/16.5-15 Fronts Yokohama AVID ENvigor 175/65-15 Foose four 42 *Removed due to build cost* US Mags Bonneville US Mags Spade

Yes that is only half the equation. That assumes that the springs are 100% identical in spring rate for open and closed pressure. Brians springs have always been really close. I would check to be safe. Im also telling you this so you know for future use. As far as factory out of the box heads always being perfect, I have to disagree strongly with this. My first set of new factory castings were off by enough to warrant adjusting key height. The last 2 sets had to be milled as they were used and shims were a must to set the springs up correctly.

Everything on your list looks good except 2 important things. The LS6 oil pump is not but some casting smoothing that can be done by hand, and a tool steel shim that you can make in 3 minutes. Not really a real cost effective part. I would strongly suggest you use BTR lifter instead of the LS7. The LS7 lifters have had many many failures lately.

Just build your own harness. It sounds like some funking stuff going on.

I'd show her some wellness and fitness.

with all due respect man. I wouldn't be messing around on this forum with that at home. I'd be messing on her. That is all.

This happens every year around spring time.

This is an easy fix then. Go to the tune repository and pull a factory 05-06 truck file and look at the fan section for what the factory uses. I don't have my software in front of me to give you the info that I run on mine.

Every set of BTR springs I have used have required setting the key height. You need to measure open pressure and closed pressure. I would call BTR and ask them for the numbers that they suggest for your application.

what software are you using?

Stick some of BTRs lifters in it and you wont have that issue. DO NOT USE LS7 lifters! Edit* Why is this in the How To Section?

deleted

Now that's cheap for 2 factory very low mileage cats. This guy better jump on that deal.

Did you actually measure each spring and correct key height?

deleted

Remember that oranges and reds will cost a lot more than greys and blues. If you are into Grey I would strongly suggest Grigio Silverstone that is a Factory Ferrari color. The contrast it gives in any lighting situation is just insane. If you are into oranges and a deep cherry look at SOM. I painted my 84 SCSB that color and it was beautiful.

deleted

deleted

deleted

deleted

Your customer service sucks. The other problem with you guys is you send shit out that doesnt fit. Having to get in a pissing contest because you cant manage to properly clearance a inlet to a throttle body where it will actually open... what a joke. Then the customer sends you a bill for the work that had to be done to make the hunk of junk you sold run... Hahaha you paid half of it. You guys at whipple are a damn joke!

This is a 409 Stainless flange that is for 3in exhaust. The flange is the exact same one corsa uses on their catback systems. I know it fits 99-07 trucks and possible the nnbs truck aswell. 40.00 shipped firm

It is out of a 2000 but the base light pewter fabric color and texture were the same from 99-07 classic. It also the exact same lower bracket from 99-07 classic.

All Items are local pick-up in Wylie TX unless noted different. Factory 99-04 Disc Brake rearend. 3.42 G80. Includes complete axle assemble, brake calipers, leaf springs, brake lines, and e brake cables. SOLD Light Pewter (Grey) Center jump seat/console from a 2000 RCSB Top has a small cracks in plastic, but still functions fine. 80.00 local PU Light Pewter flip out cup holder 40.00 Local PU or you can pay for boxing and shipping. Flowmaster 40 Series 3" center Inlet/Dual 2.5" Outlet. Case is 14" long. 40.00 Local PU or you can pay for boxing and shipping. LG Optimus G Sprint phone. In excellent shape includes everything in the original box plus a diztronic black TPU case. I used it for 2 months then bought the G2. I loved the phone but don't need it now. 140.00 shipped