Fast06

I don't know where to start looking. Two years ago before the cam and stall and custom tune I had put down 325 rwhp.

Justin at blackbear performance had tuned my truck for the cam and stall; it took a few months of runs a pcms to get everything running correctly.

Last night I put my truck on the dyno and put down a disappointing 290 horse power with 16" wheels. Previously I had put down 325hp on 18"s before my cam and torque converter and swapping from a pcmforless cookie cutter tune to a blackbear performance. I believe that I am making considerably more horse power but it is not making it to the wheels. I had to swap the injectors to the 44lbers; the stock ones were running at 129% after the cam. Would the torque converter be robbing the horsepower? I have a yank truck thruster 3000

I had an engine light come on the other day; I had a friend hook up his scanner. It had said that the B soleniod on the transmission had got stuck open. I had him clear the code and it has not popped up since. Any ideas why it would have stuck open? I have about 50,000 miles on the truck and the tranny was last serviced 10,000 miles ago with mobil one.

I wished that these were posted two weeks ago. Had to have some used ones shipped up from Florida for the same price.

He was most likely hanging in the lowest gear he could to get a jump on you. Try it from a stop; I bet the results will be a lot different.

Thanks for the help!

What do I coat the o-rings on the fuel injectors with before I install them?

I've had the same problem too. Tried to stall when stopping at lights; cleaned the TB..... everything runs smooth.

I was just turning on to the highway and noticed a STI turning in front of me. I saw some younger guys in the car, I gave it some gas to see if they wanted to play. As I was going by I heard him get on it, I already had a big jump on him. I was just looking at him in my rear view mirror until 110mph when I caught up with the traffic. I went back to the 65mph speed limit and he slowly came up next to me. He was ready this time, he jumped really hard when he heard me hit the gas, put about two lenghts on me by 95. We pulled over and talked ; he said he runs high 11's and that he cracked one turbo already. Now he wants to sell his car and get a truck to mod.

Thanks, now I don't need to buy three different tools.

Mobil 1 5w-30 and Napa Gold filter (Wix), they also have an anti-drain back valve.

Just reached 137% duty cycle on the stock injectors; so I have some 44lbers on the way. What size fuel line tool do I need to unhook the fuel lines from the fuel rails?

How much horsepower does it take 6,000 pounds to get ot 256mph?

I been having some minor issues, that should be fixed when I get my retuned pcm from Justin this week. The horsepower gain is really noticable; not a dog from a 40 punch anymore. It pulls really good to 6400rpms where I have the WOT shift set.

I have had mine stall when I'm parking or switching from reverse to drive. How are you cleaning your throttle plate? I just received the scan cable from .justin. to retune; so it will run better.

We haven't had any snow for almost a month. For the last three weeks it was hanging around -15 for the high temp and around -30 at night. Today it is 33; it almost like summer with the 60 degree difference.

I haven't done anything to the tranny yet. I know it was shifting were it was suppose to for at a least a week; then the roads got icy and stayed that way for a while. So I haven't really been on it for a while. I haven't been able to check the 1-2 WOT shift point; I can't get the traction I need to stay on the road.

I haven't been able to get a copy of the tune to post it yet. How much can you tune change after you load it into your truck? I had my 2-3 WOT shift drop from 6400 to 6000rpms.?

2006 Vortec Max 4X4 2002 Dodge Durango 4.7L 4X4 2004 GT Avalanche (24 speed, XL frame, disc brakes, gas shocks) I can pop a wheelie without any effort.

Must of been close with them being able to cruise through the quarter mile in 17.8 seconds. I would think twice before running one of those again.

I'm glad that I didn't have any torque management. I could burn my tires all I wanted from the factory without any reduction in power.

Good kill! I would of put him in his place as well. Anyone who doesn't know when to back off should get their a$$ handed to them.

I beat an older tiburon with my moms stock 04 tahoe; the look on the guys face was priceless.

I made the 330hp with a mail order tune that should be around 400hp at the crank; I'll get to the dyno next summer can't wait to see the new numbers with the cam. Should be around 380hp now! Do you have a custom tune?