Fireman31 Posted February 12, 2011 Author Report Share Posted February 12, 2011 Just got back from the dyno shop, pulling from 90-144mph with the TC locked........... .....she made...... 329rwhp 364rwtq .....figuring an 18% parasitic loss for RWD, she is making at the flywheel approximately...... 401bhp 443ft lbs I have video of the runs and will post them up sometime today...... Dyno sheet.... Quote Link to comment Share on other sites More sharing options...
nastyhabit Posted February 12, 2011 Report Share Posted February 12, 2011 Nice to see someone take time and grab a baseline before a cam swap. I'll be watching Quote Link to comment Share on other sites More sharing options...
8hnpSS Posted February 12, 2011 Report Share Posted February 12, 2011 im excited for this dan wont be such a pushover anymore LOL Quote Link to comment Share on other sites More sharing options...
Krambo Posted February 12, 2011 Report Share Posted February 12, 2011 Niko, I hear Dan bought a TVS 2300... Nice numbers on a Mustang Dan, but the gain #s after the swap will be telling. Quote Link to comment Share on other sites More sharing options...
8hnpSS Posted February 13, 2011 Report Share Posted February 13, 2011 Niko, I hear Dan bought a TVS 2300... Nice numbers on a Mustang Dan, but the gain #s after the swap will be telling. haha doc you jokester Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted February 13, 2011 Author Report Share Posted February 13, 2011 Dyno video...... http://www.silveradoss.com/forums/topic/68765-dyno-pulls/ Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted March 10, 2011 Author Report Share Posted March 10, 2011 All my parts are together! Quote Link to comment Share on other sites More sharing options...
Cramer Posted March 10, 2011 Report Share Posted March 10, 2011 Lookin good Dan. I can't wait to see the #'s when it is all done. You will enjoy it for sure. Too bad you don't live close. I have some pretty handy speciality tools for the swap. Quote Link to comment Share on other sites More sharing options...
05VHO Posted March 11, 2011 Report Share Posted March 11, 2011 Are you guys able to do your cam install with the radiator in? Quote Link to comment Share on other sites More sharing options...
misterp Posted March 11, 2011 Report Share Posted March 11, 2011 Are you guys able to do your cam install with the radiator in? Yes. Quote Link to comment Share on other sites More sharing options...
kissfans03ss Posted March 12, 2011 Report Share Posted March 12, 2011 Really, I thought the Rad would have to come out for certain. Sent from my Droid using Tapatalk Quote Link to comment Share on other sites More sharing options...
thomp62301 Posted March 12, 2011 Report Share Posted March 12, 2011 Yes. Every cam I have done on these trucks I have had to pull it. Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted March 13, 2011 Author Report Share Posted March 13, 2011 Startup and Idle........ Quote Link to comment Share on other sites More sharing options...
05VHO Posted March 14, 2011 Report Share Posted March 14, 2011 I pulled it on my last one guess I'll try to leave it in this time. Idle sounds good buddy! Quote Link to comment Share on other sites More sharing options...
Cramer Posted March 14, 2011 Report Share Posted March 14, 2011 Sounds healthy! How does she pull? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.