f1ss

Levi is great, has a lot of info on his products and is extremely helpful. Glad to see both parties very satisfied :thumbsup:

Stylin concepts or trucks had "SS" sills awhile back, if I can find a product number I will let you know. I am not sure if these were just for trucks, or could fit the TBSS also as I do not know the dimensions. Granted, this was back in 05-06. I hope I can help you out.

Thank you Brian and Jeff, the main point of this thread is to figure out which LT is more quiet overall. I know more flow/hp=more noise. Jeff I do not need a tranny, I did mention in a topic "maybe a built tranny is in my future" but mine is perfectley fine, just needs a service. And I already have a BBK setup chosen, I am just waiting to put this all together at the time I want. The main reason for the thread was to figure which of the two setup's is more quiet. It would be much easier if the Corsa Touring model was still available then I would have my answer. But if I am overpaying on the OBX setup with cats then I mine as well go ARH like 1Bad2K stated he got a set of ARH's for $800. Please no more personal or negative remarks like Jesse (NoMoreSS). Stay classy. edit - I may sound like I am re-inventing the wheel, but I am just trying to find the setup that fits me to my personal taste and needs, and I thought this was the place to ask. OBX or Dynatech with Corsa sounds badass, makes these trucks sound like Nascar. And was hoping I could get some help from people with experience with LT's, preferably OBX or ARH but I already see 2 people who have no experience with LT's on this thread.

^^That is an amazing price and I wouldn't even consider OBX if I found a set of ARH under a grand. I know calling the factory can get me a cheaper price.....well I am out the door to be cut open, thank you for the info on price 1Bad2K.

Off topic: You should check out the video of a SSS against a BMW on the Autobahn. I can't complain because I own both brands but it is priceless seeing the SSS pull on the BMW. If I can find the video I will post it.

^^^^^ It is for the SS bumper, however the brake duct grilles are not included.

Im trying to get my mods that will be added this winter down pat, so when it comes to spending money I will not think twice. So here goes a question and dilemma. I know OBX LT's have the benny of having hallow cats. The cost of these LT's are great for performance/bolt on and stainless stell, but I think it is widely known ARH has the best quality and the 3inch collectors. My question is, has anyone added Magnaflow Hi-Flo Cats to the OBX headers? It almost seems backwards to do this, but I want to have cats. Just curious if anyone has added any type of cats to the OBX LT's. Now here is the dilemma, I am using round numbers here. Say the OBX headers are $500-600. Add $330 (ish) per each cat and I am just about at the same price as ARH 1 3/4 LT's (I have not looked at the ARH LT's with cats, so I may be off on price a little). As some of the members know, I cannot have a deep tone or loud exhaust due to migraine issues. This would be the reason for adding hi-flo cats to the OBX's and also keep the Corsa Sport as quiet as possible. My driving habits are like a 90 year old (except for few occasions where I hit WOT). So I know I can keep the Corsa quiet unless I want it screaming loud. Anyone with OBX LT's please chime in on what you think of this situation. Also anyone with ARH LT's please chime in. If this header build winds up being the same price, it will be ARH. But then comes another question.....has anyone switched from OBX to ARH with a Corsa Sport? If so, what setup was more quiet? That is my goal. Obviously not having cats from the OBX's will make the truck louder, but just trying to seek input. Thank you in advance and ask any questions if I have not been clear on this post. I have surgery at 1045am today and their cutting my face literally open like flaps to clean up carcinoma cells in my cheek and jawbone. Damn Insomnia is keeping me up so I thought I would write up this header question of OBX w/Hi-Flos (or just get the ARH's if price is the same).

I think the Callaway Silverado is the sport truck for GM right now. Id keep my stock awd SS over that rumble bee.

^^^Also congrats, I knew that truck would be great for a project vehicle. Just one state north of you.

I will be sure to send him a message to see if he would like a picture of his car posted on ebay. You have to be one of the nicest and most respectful members on here and to see you and your truck used like that pisses me off, especially considering its a second time.

Good stuff in this thread. I had my tranny fluid swapped at 51k (this was my weekly driver, not daily). Been in storage for awhile but condensation build up is a serious worry so I more than likely have to flush and will be doing the pan and filter. Im worried about it being a 2nd tranny flush and I am only at 64k and all the metal parts like Blown346 stated. Maybe a built tranny is in my future, that atf fluid acts like a detergent. Just have to get it down to a shop that Aldo went to and see what the trans guy recomends. Let us know how she runs when you get your service done, I won't be doing mine for a bit.

Super sticky thread

trying to find something positive here......I like the hood a little bit

That is someone I was watching their build and thought he may be a contender. I have been waiting to see him post but it has been quite some time....I hope all is well.

^^^^^^stock only and bolt-ons will go well with the 1 3/4. 1 7/8 are for the big dogs pushing serious high hp numbers with a lot of money into heavy mods.

My great grandmother was an Austrian Princess (Royalty), she was rushed out of her castle during the war. I guess I run Royal Austrian blood.

You could get OBX LT's, the install would put you over the $700 limit though. Add a 180 t-stat (Lingenfelter {my personal choice} or SLP have good thermo's) and you'll see some nice gains Im guessing right around 400hp. Not too modded, but a nice new tone to the truck and the headers are bolt-up. What sway bars are you getting? DJM sways will not work with the Corsa exhaust, just want to let you know in case that was your plan. I am the same way, I do not want a highly modded truck. I have decided on LT's (ARH or OBX), 180 Lingenfelter thermo, Volant ram cai with AEM dry filter, Belltech sways and possible leafs for static drop, Corsa Sport (or another exhaust that may be produced in the future, company is swamped now). Happy modding

This will be interesting

The best eats! Those are some big boys right their Jeff.

Jeff, I don't have a chef. My mother and grandmother were personal best friends with Julia Child and my mom is close with Mary-Ann Esposito (she goes on tours in Italy with wine tasting contests and helps Mary-Ann cook). I just refer to my mom as "the chef" because people want to pay just to come over and taste her food. Problem is people steal recipes then go open pastry/baked good shops and make money off her personal recipes.

That sounds tastey man! Im going to have to check up with the Chef and see if she has done that before. I will ask my mother for the recipe and can PM it to you if interested Jason. -Andrew

This reminds me of when my passenger door was slammed into a rock. POS kid promised to pay for the fix but when he returned to Maine the little sally wouldn't return my calls and basically hid. Classless people are popping up everywhere. I am sorry to hear about this ding, I remember how pissed I was when my door was slammed. I left a graduation party because I simply could not "enjoy" the night anymore.

My starting bid was $350, and was willing to pay up to $550, I hope that clears things up. You even said you did not respond so you honestly do not know what I was willing to pay. I was willing to work with you on price, but at $700 this could be just under a $2000 project as it will need paint and proper fitment. Again, good luck with the sale. This is no bashing, just being honest.

No problem, I said a few months because I did not know my new garage size but I wanted to purchase it then, but with no response I just left it. I had cash in hand when I PMed you and a starting bid at $350 and never heard back (fluid conversations are key). I made it clear I would not pay Diesel Addict because he came to this site to make money off the pans. Id rather give the money to a member that is here more frequent, like you. I would offer you BSER's price, no more. To clear up more info about this pan, is it painted? Where has it been stored (garage, basement, closet?) Im sure a group buy will happen within the next year or so, the turnover of new members on here is big and they want rollpans. If it doesn't happen oh well. Good luck with sale.

$3/lb here. You need to try Australian Blue Lobster, best Ive had, yet. Now you just need homade Ravioli, stuff that Lobster in their, add lobster meat chunks with the a special sauce (made from Julia Child and my mother, the sauce). You have me drooling just thinking about it!