cstchevy

Well that's awesome that it's the same size, but I guess we wil not know how the CPU works until someone try's it or a tech guru from GM goes for it. This is very interesting. Anyone know how much they cost and what kind of power stock they can take? Is it or can it be bullet proofed like the 4l80E to 800-1000 HP?

Ok when is someone going to take it upon their self and convert their truck with the new 6 speed automatic. I see alot of good things could come out of this. You could run 4.10 gears and still pull out 19-20 on the highway(not exact). Just wondering what everyone is thinking about these. I would love to swap in a 433 LS7 that's NA running 4.10 with this 6 speed. that would be lovely. open for Discussion for INFO!

holy crap I hear you, it's pretty said when v6 trucks are ripping those bastards out. my 65 in the 6.0 held up quiet a bit better. Now I ma back to stock with 100k warranty and I plan on making them pay for their stupidity!

I agree, it's going to take a big blower or turbo to get that bitch going. I have the radix right now and I haven't changed pulleys or anything but I have actually been disappointed in it so far. Probably jsut because of it only puting out like 6lbs of boost. I could of had a nice 408 for $1000 more or $2000 a Super Stroked LS2 433 or 427. Thanks for the info though.

Big cubes, we haven't seen nothing yet. I haven't seen this before but I don't get around much anymore. This is worth checking out. I also looked into that they could be building a 480+CI LSX motor. When is it going to stop? Who is going to be the guinea pig? Warhawk LS7x Block Warhawk LS7X Heads

have just removed the handles from my truck. they are not painted and are textured with chrome handles on the actual door handle. Also have the tailgate handle in black that is textured. $50.00 for door handles and 30.00 for tailgate handle OBO ALSO Bassani race Muffler 3.5in/3.5out 16.5 inches long. $125.00 Magnaflow single 3 in/ 2.5 dual out or 2.5 in dual/ 3 single out 14" 20" 12198 $30 obo magnaflow used for 5000 miles

So are the L92 heads really that cost effective? I have looked at the Dart heads and seen them for $1399 put together. I just haven't seen many people using them instead their using AFR heads and P&P which cost alot since the heads are $2200 atleast. Just wondering if you want an all out engine in a truck building big cubes with all the reliability plus a whole lot of power. I like what your doing jsut trying to figure out the big difference in the heads. Also I would go withthe bigger cam in the selection. good luck and awesome build.

it is 16.5 inches I believe.

it's the one in the middle. don't have any more pics becasue my Digi is in oklahoma and I am in Arkansas. It looks the same with that fine mirror like polish.

I'll give you $200 shipped for it. Yo ucan get them on ebay for 240 so I think that's a fair price since you didn't post anything.

Ok guys this is brand new still have it in the original box it came in. I ordered multiple mufflers at one time and got the wrong one from the factory. So I don't want to pay restock fees and shipping since I would just be out of pocket. This is a 3.5inch in/out race muffler in Stainless Steel. It has a perforated interior with a compound of packing on inside of the casing and also over the perforations to tone out bad decibels. the total length is 16.50 inches. This thing is beautiful to look at and I would love to put it on the truck but in poe-dunk I can't get 3 inch pipe bent and they can't stretch 3-3.5 to fit. So my loss is your gain. $125.00 shipped. this finish is awesome and has a mirror reflexion.

do you want a catback or a muffler? I have a muffler.

I have tried so many exhaust including the flowmaster and multiple magnaflow muffler configurations. I am stuck on Bassani now. My old VHO had dual bassani 4x8x16 with tips dumped under the truck, no cats and LT's with x pipe. it was awesome sounding. Now on the new truck I jsut put on a custom built bassani 4x8 that is 12inches long with single 3 inchin dual 2.5 out with tips dumped. The sound isn't quiet as good as the other truck but with lt's and no cats this muffler would be wild. My next setup when I put the lt's on is going to be dual 4x8x12 single 2.5 or 3 inch in with x pipe. I like the sound of corsa but I like alot of bass and a good clean performance sound. Flowmasters were good but I wanted something that had more bark IMO. that and bassani's flow bad ass also jsut like the magnaflows. good luck in your crusade, and hope you get what you want.

this is a good cam that I found and thought I would let a few people know about it here. I just bought it's little brother 2 days ago. this is going to go super cheap. Vinci Cam

ok thanks

I responded on the other site, will take the pushrods, retainers, locks, springs for $220. let me know ASAP thanks

not yet, just got the truck and bought the cam. The heads were just an after idea. probably just be better to leave the stock ones on and spend the money on a stall and Lt's. I guess a 2600-2800 stall is what would work? how about the TB stall. would that work for this?

How would these work on my 5.3 liter withthe radix. I ws guessing they would lower compression but wouldn't I be able to run more boost. also working on a cam as we speak that would match up with the heads. It's the VHP Trucker CAM DUR @ .004" 278*/ 286* DUR @ .050" 216*/ 224* LIFT .551/.551 OVERLAP 53* LSA 115* HEADS Fully CNC, 64cc Chambers, 2.055 Int 1.6 Ext, Gen III Ferrea Valves 8mm Stems, Dual Springs, Titanium Retainers and Light Weight Locks

oklahoma and Arkansas. Have a house in both places right now.

$50 OBO!!! Anyone Anyone

chase is that cam over kill for a 5.3 liter w/radix. right now everything is stock since it's brand new but this is a good deal.

well I would do the corsa also in your case. good flow, great sound, and they are cheaper then the borlas. good luck with find exactly what you want.

don't waste your money and time on switching that. My 04 vmax was the exact same muffler as the ss had on it. that was an 04. just put on something a weld in place muffler for cheap. I have on for sale that will fit your truck. just dont waste money on swapping out to the SSS muffler IMO.

Ok guys I have been thinking and wondering how large of a engine can the radix push efficiently. Also do we have any news on the upgrade compressor and how much that will cost. Wondering if a 408 will work for the radix or will I have to upgrade to the bigger compressor and also maybe staying a little smaller motor like a 382 if the radix can keep up with that. thanks

springs sold, magnaflow still up for sale. Make some offers guys.