Quik

curious what mods do you actually have besides turbo? and what were the 2 tables that were changed?

"enough nitrous to blow yourself up period" hey how do you like that autometer WB02? im thinking of ditching my inovative for an autometer

run the stock intake till your over 1k in power. the rear cylinder is in relation to coolant. to help prevent any issue is to tune little rich. i shoot for target 11.0 with high boost levels. ppl running around at 12.0 might see a gain of 5hp more then a 11.0 tune but no reason to risk the motor.

ppl look at cost in alot of kits andppl dont realize what you get are the basics of things. you can easily have 10k into a build or you can have 2k into the build. little things like hose clamps, fluids electrical tape and etc all add up. PPl dont take those into account. now you get a basic kit and wnat more power then you have to step up size of of parts like SC or turbo, BOV or dual BOV, WG or dual WG and etc. personally for money.......if you can do your own work turbo is way to go, for simplisty of install that any person can do a maggie is the way to go, if you have coin and can afford it go with procharger. if you want the most power Turbo is only way to go, not even the value of the TVS2300 can touch a turbo build

ppl still messing around with those hot air makers called maggies? lol if this is any rule of boost limit. 18psi and 7600 rpms here as the general built it minus ARP rod bolts [bottomend]

now lets see it in place!!

wrap the stock mainifolds, Y pipe and intermeditate pipe up to the turbo. also to help with boost look into the LPE 2 step its a true plug and play application. i have one for my turbo build. this will allow you to build boost fast at the line

all dpends on tune really along with driving habbits.

i have 241s on the 4.8 right now. i think the 2.0 intake valve is helping out

THANKs everyone, im curious as well to how it will run at 18psi on the strip once i i get my clutch issues resolved

http://videos.streetfire.net/video/Quiks-0...urbo_210579.htm

next thing up for sale -12 barb fitting next thing up for sale -8 barb fitting next thing up for sale -6 to 3/8 NPT next thing up for sale Poweraid TB spacer prices... for each fitting i want 10dollars a piece. they are new order'd wrong for the Y block i wont 25 bucks for the filter 20 bucks for the TB spacer 20 bucks for the 317s 100 bucks [you can use 5.7 valves since they are same as 6.0s] for the 862s 125 bucks

well was cleaning out the garage and figured dont need a few things. up for sale are a set of 02 4.8/5.3 heads. the casting number is 862. these have 7k on them. next up for sale are a set of 04 6.0 317 heads. next up for sale Russel Y block next thing up for sale is -8 90

ive been kicking the idea around of selling my rotating assembly. here is a link to what i have Pro Assembly - LS1 LS2 LS6 408ci 10.4:1 6.125 H-beam - Lunati Power my rotating assembly has 1200 miles on it. this was in my 408 that i ran in 07. im looking to get 2k for the crank and rods. i have 7 good pistons i would also sell with the crank and rods for 2100. as you can see the pistons are wiseco. This kit when it was purchased was 3500 bucks, they now sell the kit for 3300. if your wondering why is this so much more money then others. well your paying for quailty and lightweight stuff. look at your big dawgs they run lunati. im selling it cause i dont need lightweight internals or a low reving turbo 408. i thought of using the crank and rods in a LSX block for my camaro but i dont need a 427 for what i want to do with the car.

need a camera guy, also since we are suppose to get our first snow coating i think truck is in garage for rest of year. i might trailer it down ATCO or is it Cecil and see what it runs but my clutch hates me so i not sure if that is such a good idea

ok another update. threw in a working set of 60s. got the idle working again. so went out threw in some more WW set the knob at 6. turned the boost knob up to half way on the low setting and off i went. at 18* timing non the less. so made a couple pulls. mostly 3rd and part of 4th just to see how this truck is. all i can say is godly. i hit 18psi. i was shooting for 16. 10.7 AFR. its insane i thought 9 was fast i thought 13 was fast. now this is flat out insane. i now need brakes. i was short shifting at 6k instead of 6800rpms. i checked motor and no unusualy noises, no coolant anywhere good vaccum again. traction is a joke now. i went around a bend on rte 51 and not even more then half throttle the ass kicked out and started drifting to the right. so i stayed in it and feather the gas and pulled off a drift for about 60 feet around the bend. it was great. earlier before that after i did the first log and uploaded the changes i went to do another pull some dude on a bike was in front so i let him get a good distance on me so i had plenty of room to test out the truck. i got up on his ass from a stop in matter of seconds. so much that i had to hold brakes to floor and barely slowed down in time. its time to get a large brake kit. looks like no more skinnies at the track after that my stomach dropped. i never fetl acceration like that ever. i have a CBR 1krr and thats a mid 10 bike with me on it. and the feeling my truck gave me isnt no where near what the bike does. this flat out runs o btw 18psi in 4th is a joke for clutch

yupp rebuildables sometimes are alot cheaper then buying used. and this way he knows every single bolt and nut though out the entire suv

easy.....ready for it 8k total into this build...find a TBSS with this amount into it

if i call it a tbss then ppl will cry and moan as they did a year ago or so. im not sure if he actuall titled it as a 06 or not. i havent seen it fully together lately

http://videos.pittspeed.com/video/dca47d5c...b2f0182adad.htm truck isnt tuned for part of video. its 100% tbss minus rear bumper and 03 title. the owner doesnt like the TBSS actual rear bumper so he had a stock one work'd its on its way to memphis

well i was out working on the tune in the truck. its coming along very well. truck is running great.. well anyways i was getting onto the parkway and i see this EVO in the back. he follows me for several miles thru traffic. we go thru 2 tunnels and then road opens up. i see him take off so i let him know im game. so he comes up next to me after we get to legal limit. im not sure if he was honking or not but he jumped me so i was playing catch up. i was in third and deep into vaccum when he took off well im winding out, i grab fourth and now instead of spinning tires i was on my DRs my clutch started slipping [new ram clutch claimed 800hp in a fbody] ok it grabs and im on hte pull again top of 4th im right on his ass. We slow and proceed around afew cars. now were in clear good so we slow down and he on my left. were going about 50mph and i just hold the brakes and floor it [brake boost this lol] i let off the brake and away i go oh wait damm clutch starts to slip WTF, it grabs here we go i start to get ahead, time to shift and then clutch slips little it grabs again and im ahead again bout half truck length, take top of 4th im almost full lenght on him, grab 5th damm clutch slips again so he catchs up WTF, it grabs again and off i go. we finish the race at 140 [cars up front of us] race ends as his nose is at my door. we honk and go our own ways. Things to know: truck move on 8lbs of boost hate to say this but if i was 80e that car wouldnt of been close cant wait to see this thing with more boost 488s arent to much IMHO this thing spools with no issues a truck beating a modded evo in a roll race [brick vs aerodynamics] was deffently fun and nice being able to play with a car like this even on low boost

for your boost level Tr6 are fine

seen that truck before on the net. he had different wheels that were red. hes boys with a white silverado with white SS wheels