D1SCSS Posted July 6, 2013 Author Report Share Posted July 6, 2013 Here are a few pics from my cell. I still need to clean up the wiring and finish a few things but you get the idea. Sorry for the crappy pics, I can't upload from my nice camera right now. Quote Link to comment Share on other sites More sharing options...
D1SCSS Posted July 9, 2013 Author Report Share Posted July 9, 2013 I got my AC-Delco 145 amp alt and installed it today. I have to trim a little off the rear plastic cover on the new alternator to clear my fuel rail. I also received my new water pump. I am having a buddy weld the pulley on the pump shaft to help prevent it from spinning off due to the Procharger. When I installed the intake last week I started to hear a slight rattle noise from inside the truck and found that it was caused by the FPR being mounted directly to the firewall so today I installed rubber insolators between the FPR and the firewall. The truck is really starting to come along very nice... I REALLY want to find chrome SSS wheels for my truck. I've been asking every SS Silverado owner I can find if they want to trade for my Weld wheels No luck yet:( Quote Link to comment Share on other sites More sharing options...
joeud Posted August 1, 2013 Report Share Posted August 1, 2013 Where did you purchase the brake kit? Would like to do the same to my 03 thanks Quote Link to comment Share on other sites More sharing options...
D1SCSS Posted August 2, 2013 Author Report Share Posted August 2, 2013 I bought the brakes from a guy off of pt.net Quote Link to comment Share on other sites More sharing options...
karduke Posted August 2, 2013 Report Share Posted August 2, 2013 Your truck looks good. Did you notice any difference using an Edelbrock intake? Thinking about replacing mine and would like to get ideas. Quote Link to comment Share on other sites More sharing options...
D1SCSS Posted August 2, 2013 Author Report Share Posted August 2, 2013 I love the intake! I have a 2800 stall and when I get on it hard I do notice it pulls harder than it did before. When my truck hits second gear at wide open throttle it feels like its going to break the tires loose. Quote Link to comment Share on other sites More sharing options...
D1SCSS Posted August 9, 2013 Author Report Share Posted August 9, 2013 I been working on my truck almost everyday for the last few weeks. I've been cleaning up wiring and finishing odds and ends. I finished installing my Phantom Automated boost and wideband gauges, installed a vacuum block so I don't have a ton of vacuum hose coming out of the intake. I also finished the piping from the D1 to the intercooler and plumbed the ProFlo BOV. Today I replace the old nasty looking coolant bottle with a new one. And last but not least, I bought a Innovators West 8 rib pulley kit! I can't wait to get it finished. I will take pics this weekend and post up. Quote Link to comment Share on other sites More sharing options...
GI.SS Posted August 9, 2013 Report Share Posted August 9, 2013 a different coolant bottle or just a new oem replacement? Quote Link to comment Share on other sites More sharing options...
D1SCSS Posted August 11, 2013 Author Report Share Posted August 11, 2013 Here is the most recent pics of the engine compartment.... Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted August 13, 2013 Report Share Posted August 13, 2013 Still got L92 heads? Sent from my Samsung GS4 using Xparent Red Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
D1SCSS Posted August 13, 2013 Author Report Share Posted August 13, 2013 I wish! Justin remove those heads before he posted it on this forum. Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted August 13, 2013 Report Share Posted August 13, 2013 (edited) Thought you may have had them because of a conversation with Jenna earlier. Sent from my Samsung GS4 using Xparent Red Tapatalk 2 Edited August 13, 2013 by chawkins6789 (see edit history) Quote Link to comment Share on other sites More sharing options...
D1SCSS Posted August 13, 2013 Author Report Share Posted August 13, 2013 Nope, its got 317's on it. Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted August 13, 2013 Report Share Posted August 13, 2013 She may have meant headers because those are welded on Sent from my Samsung GS4 using Xparent Red Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
D1SCSS Posted August 24, 2013 Author Report Share Posted August 24, 2013 Today, I finished installing the Tru-cool 40k trans cooler with new lines and brackets. I'm going to order a fuel sump kit for my gas tank as soon as I make up my mind on which one I want. Once I have the sump I will install the Bosch 044 pump on the frame rail. I have 2 044 pumps if I end up needing more fuel at a later time. Last night I had a dream that I was driving my truck with 12 lbs of boost and I could not notice any power difference! I hope that's not the case!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.