rdavid0412

DANG!!!!!!!!!!!!

Your check will be in the mail!

Here's how we'll settle this! You all can come to my house and detail my truck and I will be the judge

Pending !!!!!!!!!!!!

With whom or where did you shoot? My father still shoots competitively in the PVA circut and has been a Ranked #1 in the nation 2 times in the past 3 years?

With whom or where did you shoot? My father still shoots competitively in the PVA circut and has been a Ranked #1 in the nation 2 times in the past 3 years? With whom or where did you shoot? My father still shoots competitively in the PVA circut and has been a Ranked #1 in the nation 2 times in the past 3 years?

I will take some tomorrow and post them on here. But it's just a pulley and has 3.2" stamped on it. I bought it from ProCharger.

I have a slightly used 6 rib 3.2" P1SC pulley, I sand blasted the ribs to prevent any slipping issues and I haven't had any issues. I can text pics if you want. New they are $89. 910-33 zero-37 two one. Thanks. $50 includes shipping.

The Nitto 420S tread pattern was designed by an artist and it shows. The 420S sports one of the most original and aggressive SUV tread pattern available on the market today. The unique tread design is the perfect compliment to your wheels. Many SUV tires are directional meaning that they cannot be rotated from side to side - only front to back. The Nitto 420S non-directional tread design gives you the freedom to rotate the tires front, back, and side to side. http://www.discounttiredirect.com/direct/findTireDetail.do?ra=searchTiresBySize.do&pc=40266&counter=1&ar=50&rd=20&sw=false&cs=305

Just looking for input. Would you buy them again? Are you satisfyed with them? Any issues with em?

Ok, heres what I'm doing so far. I have the 8pin to 6pin x-link ordered. I am using my stock rails and crossover. The injectors I am using are tall enough to allow me to use it so far. As for the rails, the tabs are trimmed so they dont hit the intake. I am also having adapters made to secure the rails to the intake. What about the MAP? Can I just cut the harness loom open and is their enough wire to go from the old rear location to the middle where the new location is? What intake gaskets do i use?

anyone run the Nitto 420? or the Kumho's?

Your welcome!!!!!!!!!!!!

I installed the HID kits and thats about it this weekend. I was told most of my parts will be in by friday......... So I will wait............................

Dang, thanks for the information. How can you lose power on doing the swap? all the info i have seen and heard is that they are more efficient and most applications gain up to 20hpand torque? This is also going on a boosted application

but i can still find adapters to swap them over right?

So far I am thinking of going with the 305/50/20. they are a set from discount tire, IIRC they are Kumhos. they run about $200 each and have a 3 year warrenty? The other set i looked at on the same website are Hankooks in a 285/50/20, and they run about $175 ea. I want great treadware and decent life with good looks. I really like the Hankooks more then anything but they dont manufacture them in the size I want. If you do have other suggestions and other websites can you please attach a hyperlink or something to that extent. Thanks for your advise in advance.

Shocks are not load bearing...... Did you measure it with a full tank of gas?. Measure the torsion bar bolts, Even 1/2 to 1 full turn diference will give you that much sag to one side.

Do you still have the option as to the color of the bulbs with these kits as well?

Got any write ups or picsof the back of the taillights. I think the wiring for the balasts will be pretty straight forward

Do you have the Reverse light kits available yet

I have the battle creek holster in my truck for my XD-40 sub-compact and love it. I also havethe Galco "in-thw-waist " holster. I am very satisfied with both.

If your looking for bigger upgrades, I would say intake and TB accompanied with injectors. I would assume you want to stay NA.

What size injectors came in a 99 silverado Z71 5.3? 21#? Next question is the size injectors that came in an 05-05 TBSS? 26#? Are they the same style connector too?

do you have your brake controller plugged in the right spot ?